A/C System Diagnostic Tool
Identifies refrigerant type and purges damaged air.
In addition to dependable refrigerant identification, the ID Plus measures non-condensable gases (air) in the refrigerant and purges it directly from the tank or system. Displays the actual percentage of R12, R134a, R22 and air in the system or tank. Gives you the option of purging air if a significant concentration is found. Hydrocarbon alarm sounds if flammable substances are sensed. On-board printer port allows you to connect a printer for hard copy of testing results. Gauge on panel shows system pressure. Displays test results in less than a minute and passes the refrigerant only if it is 98% pure.
In addition to dependable refrigerant identification, the ID Plus measures non-condensable gases (air) in the refrigerant and purges it directly from the tank or system. Displays the actual percentage of R12, R134a, R22 and air in the system or tank. Gives you the option of purging air if a significant concentration is found. Hydrocarbon alarm sounds if flammable substances are sensed. On-board printer port allows you to connect a printer for hard copy of testing results. Gauge on panel shows system pressure. Displays test results in less than a minute and passes the refrigerant only if it is 98% pure.
- To assure consistent, rapid results the units are not pressure/temperature dependent
- The instruments use dependable infrared technology developed by Neutronics, Inc., to determine if the refrigerant is an acceptable type and is pure enough to be used
- The unique case design puts all the components up front where you can see them at a glance, including the filter
- Contoured case can be held in either hand and rubber feet protect the vehicle's finish
- Specifications: 115V, 60 Hz, AC. 11" L x 9" W x 4- 1/2" D
Weight | 8.4 |
Brand | Robinair |
Part Number | 16910 |
Line Code | ROB |
UPC | 637335001671 |
Terminology | A/C System Diagnostic Tool |
Weight | 8.4 |
For warranty information please contact
Auto-Wares.